No
need to drain water lines, sprinkler systems, or hot water systems
before cutting pipe or tubing. The Cold-Shot keeps pressurized systems
operating while you make repairs.
It freezes all
type of liquids in steel, copper, cast iron, aluminum, and plastic
pipes ranging from 1/8" to 2" (10 mm – 60 mm) using
carbon dioxide (CO2). Dip-tube type cylinders are available at all
welding supply houses.
The Cold-Shot
is faster and less expensive than “refrigerator-type”
units; faster and uses less CO2 than “bag-type” units.
In five minutes you’re ready to go to work on copper tubing,
just three minutes for cast iron pipe. |
|
The Cold-Shot is easy to use. Just place the freeze head around the pipe, attach the hose, and open the cylinder valve. Liquid carbon dioxide will flow into the freeze head and form dry ice with a temperature of minus 110F° (-79C°). That’s cold enough to form an ice pack that can withstand 7,000 psi, yet won’t damage pipes.
Kit includes
10 sets of freeze heads for 1/8" to 2" lines (10mm to 60mm),
two high pressure spiral hoses with injectors, T-distributor, locking
nut, hex head screwdriver, rubber gloves, goggles and carrying case.
|
