|
|
 |
|
|

The Speedrooter
has a reputation for being a machine that really can take
a beating. Its frame is braced at key stress points, the drum
is supported front and back for longer bearing wear, and Generals
unique Flexicore® wire rope center cables are so tough
they carry a one year limited warranty.
To
make the new Speedrooter 91 even more user friendly, weve
redesigned the frame to make it easier for you to load onto a truck.
As its being loaded, the machine slides smoothly from the
loading wheel to the handle to the stair climbers and finally to
the wheels.
Weve also given the Speedrooter 91 an adjustable height handle.
It can be three inches longer or more compact, depending upon your
preference. And the machine has a swivel motor mount that swings
to the side for more clearance when switching drums.
For those smaller lines, you can switch to a small drum that holds
100 feet of 1/2" cable, a job that takes less than a minute.
Just loosen three knobs, swing the motor out of the way, and lift
off the drum.
The power cable feed drives 3/4", 5/8", and 1/2"
cables and has the pulling power to get your cables out of the line,
even on long, tough jobs. To adjust 3/4" or 5/8" cables,
you simple turn the knob on top of the feed. The screwdriver stays
in the tool box.
The large drum has a see-through inner cage, so you can quickly
tell how much cable is left in the drum.

|
|
Wire
Rope Center Construction
Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire
rope and heat treated. Has unequalled strength and the right amount
of flexibility. So tough it carries a one-year warranty against defect
or breakage.
Flexicore Patent Nos. 2,244,735 and 2,849,870 |
Speedrooter 91 Units - Complete and Ready to Operate |
| The following
units, which are COMPLETE AND READY TO OPERATE, consist of Speedrooter
91 (basic unit) Power Cable Feed, Guide Tube, Safety Slip Clutch,
and equipment as indicated: |
A-PS91-A with 100 ft. x 3/4" cable (100EM5),
100 ft. x 1/2" cable (100EM3) in small drum, and COCS combination
cutter set.
|
| A-PS91-B with 75 ft. x 3/4" cable (75EM5)
and SRCS cutter set. |
| A-PS91-C with 100 ft. x 3/4" cable (100EM5)
and SRCS cutter set. |
| A-PS91-E with 100 ft. x 5/8" cable (100EM4)
and SRCS cutter set. |
| To order without Power Cable Feed, delete prefix "P",
as A-S91-A. |
| With 3/4 HP motor, add prefix "3/4HP", as 3/4HP-A- P-S91-E. |
| 220/230 & 240 Volt/50 Hz units are available. |
Speedrooter
91 Specifications |
Weight:
115 lbs. (52 kg) without cable |
Dimensions:
26" deep; 22 wide; 41" high.
(66 cm x 56 cm x 104 cm) |
Drums:
Large drum holds 100 ft. x 3/4" cable. (30 m x 19 mm).
Optional small drum holds 100 ft. x 1/2" cable (30 m x 12.7 mm). |
Drum Removal:
Loosen three knobs, tilt motor back, and lift off. |
Motor:
1/2 hp with capacitor start, forward-off-reverse switch.
20 ft. power cord and ground fault circuit interrupter. |
Safety Slip Clutch:
Protects cable and operator. |
Foot Switch:
Pneumatic, with no electrical contact between pedal and motor. |
Power Cable Feed:
Drives and retracts cable at variable speed without having to reverse motor
rotation. |
Wheels:
10" semi-pneumatic with roller bearings. |
Stair Climbers:
Heavy duty V-belts running on nylon rollers. |
Wheel Brake:
Keeps machine in place after it has been positioned by drain opening. |
Truck Loading Wheel:
Enables one person to lift machine onto bed of truck. |
Tool Box:
Attached to rear of machine. |
Leather Gloves:
For hand protection when guiding cable. |
Cables:
Left-wound Flexicore wire rope center 3/4" diameter for 4" to
10" lines and 3" lines without sharp bends; 5/8" diameter
for 3" to 6" lines; 1/2" diameter for 2" to 3"
lines. |
Cutter
Set:
33" Flexible Leader, Spear Head, 2" U-Cutter, 3" Side Cutter
Blades, 4" Side Cutter Blades,
3" Heavy Duty Saw Blade, 4" Rotary Saw Blades, and Large Retrieving
Tool. |
Additional Cutter
Set:
13" Flexible Leader, Arrow Head, 1-1/2" U Cutter,2" Side
Cutter Blades, Small Retrieving Tool. |
|
|