|
|
| 
|
|
|
|
In
addition to “walk-in” operation, the Rodrunner can be set
up close to the drain opening, making it much easier to work in small
spaces.
For close-up work, the wheel brake is set, the power switch is placed
next to the machine to be used as a foot switch, and the cable guide
hose is attached. Now the Rodrunner is ready to handle the toughest
stoppages in 3" to 10" lines, as far away as 200 feet.
The machine has a two-way chuck handle, which can be set to work like
a “dead man’s throttle,” or it can be locked against
the cable, so you have both hands free to hold the cable. This is
a feature that’s really useful on tough jobs.
A heavy-duty 3/4 hp motor with capacitor and overload protection spins
the cable at 485 rpm, an ideal speed for self-feeding into the line
while protecting the cable against sudden torque build-ups. For additional
protection, the Rodrunner has an adjustable slip clutch, which is
factory set at 100 inch pounds. |
| |
 |
Ten
foot “Cable Saver” sections for the Rodrunner come in the
all purpose Flexichain which has a chain center, and a stiffer Proflex
which has a spring center. |
Rodrunner Units - Complete and Ready to Operate |
The following
units, which are COMPLETE AND READY TO OPERATE, consist of
Rodrunner (basic unit), Rear Guide Hose and equipment as indicated. |
| R-RD-GP with ten 10GP Proflex sections with "G"
connectors, and RDCS-G cutter set. |
| R-RD-LP with ten 10LP Proflex sections with "L"
connectors, and RDCS-L cutter set. |
| 220/230 & 240 Volt/50 Hz units are available. |
Rodrunner™
Specifications |
Weight:
90 lbs. (41 kg) |
Dimensions:
22" wide x 19" high with handle folded down.(56 cm x 48 cm) |
Motor:
Heavy-duty 3/4 hp with capacitor and 20 ft. power cord rotates cables at
485 rpm.
Optional 1 hp motor rotates cables at 400 rpm. Equipped with ground fault
circuit interrupter. |
Wheels:
10" rear wheels, 5" caster wheel. |
Wheel Brake:
Locks rear wheels in place or releases them in an instant. |
Combination Hand
or Foot Operated Power Switch:
Air activated for safety; no electrical connection between motor and switch;
can be used as hand or foot switch. Ten foot air tube. |
Twin V-Belts:
For better power transmission. |
Safety Clutch:
An adjustable spring-loaded clutch is mounted at the rear of the cable drive
shaft. Accessible without removing machine housing. |
Chuck Handle:
Clamps on cable or acts as “dead-man's throttle.” |
Cable Counter:
Manually operated, to record number of cables in line. |
Rear Cable Guide
Hose:
To limit cable whipping behind machine. |
Folding Handle:
Reduces truck storage space. |
Cutter Set:
Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter,
3" Heavy Duty Saw Blade, 4" Rotary Saw Blade, Large Retrieving
Tool, Coupling Wrench. |
| How-To Video included. |
|
|
