|
|
 |
|
|
|
 |
The
Mini-Rooter clears lines from roof top to basement, including kitchen,
bath and laundry. With 50 ft. of 1/2" cable, it weighs just 60 lbs.
This inexpensive, easy-to-use machine has lots of time saving features.
For instance, you can remove the zinc-plated cage in seconds for more
portability or to switch to a different cable diameter – with
no mess or lost time.
Safety features include an air foot switch, ground fault circuit interrupter,
and a safety slip clutch. An integral inner drum and distributor tube
help prevent cable tangling under load. |
|
|
Wire Rope
Center Construction
Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire
rope and heat treated. Has unequalled strength and the right amount
of flexibility. So tough it carries a one-year warranty against defect
or breakage.
Flexicore Patent Nos. 2,244,735 and 2,849,870 |
 |
Mini- Rooter Units - Complete and Ready to Operate |
| The
following units, which are COMPLETE AND READY TO OPERATE, consist
of Mini-Rooter (basic unit) and Cable as indicated: |
| MR-A-O with 50 ft. x 3/8" (50EM2) cable and
MRCS Cutter Set. |
| MR-B-O with 75 ft. x 3/8" (75EM2) cable and
MRCS Cutter Set. |
| MR-C-O with 50 ft. x 1/2" (50EM3) cable and
MRCS Cutter Set. |
| MR-D-O with 75 ft. x 1/2" (75EM3) cable and
MRCS Cutter Set. |
Mini-Rooter™
Specifications |
Weight:
32 lbs. without cable. |
Capacity:
75 ft. of 3/8" or 1/2" Flexicore Cable. |
Motor:
1/3 hp, thermal overload protection, Forward/Off/Reverse Switch. |
Safety Slip Clutch:
Protects cable and operator. |
Flexicore Cable:
Heavy gauge wire coiled tightly around 42 strand aircraft-type wire rope
and heat treated. |
Foot Pedal:
Uses air pressure, so there's no electrical contact between pedal and motor. |
Power Cord:
10 ft., 3 wire; equipped with ground fault circuit interrupter |
Cutter Set:
Arrow head, 1 1/2" U-Cutter, 2" Side Cutters and Boring Gimlet.
Others available. |
Leather Gloves:
With reinforced palm for hand protection. |
| How-To Video included. |
|
|
