The variable speed power cable feed makes the Metro-Rooter easier for your customers to use. The automatic feed drives cable into the line at up to 20 feet per minute. Put the feed in reverse and it retracts the cable easily too.

The Power cable feed and guide tube combination allows the cable to feed smoothly into the line while keeping your customers hands clean and away from the spinning cable.

The Metro-Rooter’s heavy-duty reinforced frame takes rough handling in the field. The big 10” heavy duty wheels and a truck loading wheel make it easier to transport the machine to and from the job. A cutter holder on the frame keeps all the cutters within easy reach. And the fold down handle makes the machine more compact to take up less space in the truck.

With tough 9/16” Flexicore® cable, the Metro-Rooter clears 2” – 3”, and most 4” lines up to 100 feet long.

Flexicore® Wire Rope Center Cables

Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.

Flexicore Patent Nos. 2,244,735 and 2,849,870

Metro-Rooter ™ Model Open Drum Units Complete and Ready to Operate

Basic Unit Includes:

• 1/3 hp Capacitor Motor with Forward-Off-Reverse Switch
• 10” Heavy-Duty Wheels and Folding Handle
• Air Foot Switch
• Safety Slip Clutch
• Open Drum

P-ME-B-O

With 75 ft. x 9/16” cable (75EM3), Open Drum, Power Cable Feed, JRCS cutter set, Power Cable Feed and Guide Tube

P-ME-C-O

With 100 ft. x 9/16” cable (100EM3), Open Drum, Power Cable Feed, JRCS cutter set, Power Cable Feed and Guide Tube   

Weight:
92 lbs. (42 kg) without cable

Dimensions:
27” deep x 18-1/2” wide x 46” high--26” (66cm) high with handle folded down (68cm x 47cm x 117cm).

Drum Capacity:
100 ft. x 9/16” (30m x 12.7mm)

Drum Removal:
Remove two bolts and slide drum off shaft.

Motor:
1/3 hp with capacitor start, forward-off-reverse switch, 20 ft. power cord and ground fault circuit interrupter.

Foot Switch:
Pneumatic, with no electrical contact between pedal and motor.

Power Cable Feed:
Drives and retracts cable at variable speed without having to reverse motor rotation.

Wheels:
10” Heavy-duty semi-pneumatic with ball bearings

Wheel brake:
Passive wheel brake system holds the machine in place on the job and in the truck.

Folding handle:
Tall enough to make it easy to move to the job, yet quickly folds to take less room in vehicle.

Truck Loading Wheel:
Enables one person to lift machine into truck bed.