| |
|
|
|
 |
The
Easy Rooter is a tough, easy-to-use machine. It has a rugged powder
coated steel frame with roll bars to protect the motor and heavy-duty
roller bearings in the cage for longer life and greater motor efficiency
on long runs. The large zinc-plated cage holds 100 feet of 3/4"
or 5/8" Flexicore cable, while optional smaller cage holds 100
feet of 1/2" cable.
An extra-long plated folding handle quickly locks in place, making
it much easier to wheel the Easy Rooter to the job, without sacrificing
the compact size needed for easy loading in a car trunk.
The Easy Rooter rolls smoothly on big 10" ball bearing wheels
mounted on a half inch reinforced axle. Power is supplied by a 1/3
hp motor with capacitor start, thermal overload protection, and reverse
switch. Standard safety features include an air-actuated foot pedal,
ground fault circuit interrupter, and safety slip clutch. |
|
Wire
Rope Center Construction
Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire
rope and heat treated. Has unequalled strength and the right amount
of flexibility. So tough it carries a one-year warranty against defect
or breakage.
Flexicore Patent Nos. 2,244,735 and 2,849,870 |
Senior Cutter Set for 5/8" & 3/4" Cables
Catalog #
SRCS-R |
Cutter Name |
Part
Number |
Application |
|
Spear Head |
SHD |
Starting Drill
(Gets water flowing) |
|
2" U-Cutter |
2UC |
For cutting and scraping |
|
3" Heavy Duty Side Cutter |
3HDSC
|
For cutting and scraping |
|
3" Heavy Duty Saw Blade |
3HDB
|
For roots and other stoppages |
|
Large Retrieving Tool |
RTR-2 |
For removing loose objects and broken cables |
|
Easy Rooter Units - Complete and Ready to Operate |
| The following
units, which are COMPLETE AND READY TO OPERATE, consist of Easy
Rooter (basic unit), and equipment as indicated: |
| ER-A with one 75 ft. x 3/4" cable (75EM5);
one 75 ft. x 1/2" cable (75EM3) in small cage; and COCS-R Combination
cutter set for both cables. |
ER-B with one 75 ft. x 3/4" cable (75EM5);
and complete SRCS-R cutter set.
|
| ER-C with one 75 ft. x 5/8" cable (75EM4);
and complete SRCS-R cutter set. |
| ER-D with one 100 ft. x 3/4" cable (100EM5);
and complete SRCS-R cutter set. |
| ER-E with one 100 ft. x 5/8" cable (100EM4);
and complete SRCS-R cutter set. |
Easy-Rooter ™
Specifications |
Weight:
80 lbs. without cable.(36 kg) |
Large Cage:
Zinc plated. 100 ft. of 3/4" capacity with heavy duty roller bearings |
Small Cage:
100 ft. of 1/2" capacity with oilite bronze bushings. |
Motor:
1/3 hp heavy duty, capacitor start, thermal overload protection, Forward/Off/Reverse Switch. |
Safety Slip Clutch:
Protects cable and operator. |
Foot Pedal:
Leaves operator‘s hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. |
Power Cord:
20 ft. 3-wire vinyl covered with molded plug. Equipped with ground fault circuit interrupter. |
Wheels:
10" Semi-pneumatic tires, with roller bearings. |
Cables:
3/4" for 4-10" lines; 5/8" for 3-6" lines; 1/2" for 2-3" lines and 4" lines without roots. |
Cutter Set:
Spear Head, 2" U-Cutter, 3" Heavy-Duty Side Cutter, 3" Heavy-Duty Saw Blade and Large Retriever. On units with 1/2" cable, Arrow Head, 1-1/2" U-Cutter and Small Retriever also included. Others available. |
Leather Gloves:
With double-reinforced palm, for hand protection when guiding cable. |
| How-To Video included. |
 |
|
|
SHD.jpg){kind=small}
2UC.jpg){kind=small}
HDSC.jpg)
HDB.jpg){kind=small}
RTR-2.jpg)
