|
|
|
|
Equipped with a variable speed Power Cable Feed and variable speed motor, the Drain-Rooter PH makes drain cleaning jobs cleaner and easier. Quickly clear sinks, tubs and laundry drains in 1-1/4” to 3’ drain lines.
The Drain-Rooter PH feeds and retrieves the cable at up to 16 feet per minute. A four-foot guide hose eliminates cable whipping, dirty fixtures and messy floors, and the need to hold a rotating cable in your hands.
And the drum speed can be varied by changing the pressure on the foot pedal, making it easier to thread the boring head through strainers. Drum capacity is 50 feet of 5/16” or 35 ft. of 3/8” Flexicore® cable.
The Drain-Rooter PH is a real labor-saver on long jobs or when working in a cramped area where the weight of the machine could get burdensome. It can be operated in both horizontal and vertical positions to get closer to the drain opening. |
|
|
|
Flexicore® Wire Rope Center Cables
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough it has a one year warranty against defect or breakage.
Flexicore Patent Nos. 2,244,735 and 2,849,870
|
HECS Handylectric Cutter set |
|
Part Number |
Cutter Name |
Application |
|
AH |
Arrow Head Starting Drill |
Starting Drill (Gets water flowing) |
|
BG |
Boring Gimlet |
For removing loose objects |
|
DHBG |
Down Head Boring Gimlet |
For removing loose objects (Goes down waste, not up stack) |
|
FAH |
Flexible Spring Arrow Head Cutter |
Starting Drill (For sharp turns in small lines) |
|
1-1/4 SCB |
1-1/4 Side Cutter Blade (2 piece set) |
For cutting and scraping |
Drain-Rooter PH™ Open Drum Units Complete and ready to operate |
| Basic Unit includes: |
- Variable Speed Power Cable Feed
- Variable Speed Motor with Reverse Switch
- Water Proof Air Foot Switch
- Four Foot Guide Hose
- Open Drum
|
| PH-DR-A-O |
With 50’ x 5/16” (50HE1-A-DH) Cable |
| PH-DR-B-O |
With 50’ x 5/16” (50HE1-AC) Cable and HECS Cutter Set |
| PH-DR-C-O |
With 35’ x 3/8” (35HE2) Cable and HECS Cutter Set |
| PH-DR-D-O |
With 50’ x 1/4” (50HE1-DH) Cable |
Drain-Rooter PH™ Specifications |
Weight:
Weight: 22 lbs. (10 kg) (without cable) |
Dimensions:
22” deep x 13-1/2” wide x 15” high (without hose) (56 cm x 34 cm x 38 cm) |
Drum:
Heavy gauge stamped aluminum back with wire cage. |
Capacity:
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable.
All cables are left hand wound and reinforced with a wire rope center. |
Power Feed Cable:
Drives 1/4", 5/16" and 3/8" cables. |
Motor:
All ball-bearing, double insulated, reversible motor with speed control; 0-400 rpm, 230 and 240 volts available. |
Foot Pedal:
Pneumatic foot pedal controls variable speed motor. Leaves operator’s hands free to control cable. |
Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter Blade, Flexible Arrow Head Cutter |
UL Listed and CSA Approved
|
|
