| Mini-Rooter™ Specifications |
|
Weight: |
| Dimensions:
18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). |
| Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. |
| J-Drum: Capacity of 50 ft. of 1/4" or 5/16" Flexicore cable. |
| Dual Drum: Capacity of 25 ft. of 1/4" or 5/16" in inner drum. 50 ft. of 5/16" or 3/8" Flexicore cable in outer drum. |
| Cutter Set:
Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. |
| Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. |
| Load Speed:
165 rpm. |
| Belt Guard:
High impact plastic. |
| Power Cable Feed:
Drives 1/2" and 3/8" cables. (Optional) |
| Foot Pedal:
Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. |
| Power
Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. |
| Leather Gloves:
With reinforced palm for hand protection and proper slippage when guiding cable. |