This
sectional cable machine combines power, maneuverability, and light
weight in an easy to use package that speeds up drain cleaning work.
Just press down on the chuck handle, and a 3/4 hp motor spins 1-1/4"
cable at 715 rpm, cleaning lines up to 10" in diameter 200
feet away.
The Hot-Rodder
stands tall on the job. But it stands small in your truck, thanks
to a handle that folds over in seconds to make the machine more
compact. You can also use the handle as an aid when loading the
machine into your truck. And the Hot-Rodder’s big 10"
wheels make it easy to move the machine to and from the job.
The high-density
plastic motor cover is so tough it can stand up to sledge hammer
blows. The frame is powder coated and the handle is chrome plated,
so the machine will look newer longer.
You can also use the machine to drive 7/8" x 15' sections by changing to an optional set of chuck jaws (R-R10AD) - a two minute job - to clear smaller lines.
Hot-Rodder Units - Complete and Ready to Operate |
| HT-GF with ten 10 ft. x 1-1/4" Flexichain sections with “G”
connectors (10GF), rear guide hose and RDCS-G cutter set. Boxed
Wt. 258 lbs. (117 Kg) |
| HT-GP with ten 10 ft. x 1-1/4" Proflex sections with “G”
connectors (10GP), rear guide hose and RDCS-G cutter set. Boxed
Wt. 278 lbs. (126 Kg) |
| HT-LP with ten 10 ft. x 1-1/4" Proflex sections with “L”
connectors (10LP), rear guide hose and RDCS-Lcutter set. Boxed Wt.
278 lbs. (126 Kg) |
| HT-R11 with seven 15 ft. x 1-1/4" hollow sections with “R”
connectors (15R11), rear guide hose and RDCS-R cutter set. Boxed
Wt. 196 lbs. (89 Kg) |
| HT-R14 with seven 15 ft. x 1-1/4" heavy-duty hollow sections with
"R" connectors (15R14), rear guide hose and RDCS-R cutter
set. Boxed Wt. 203 lbs. (92 kg) |
Hot-Rodder
™ Specifications |
Weight:
96 lbs. (43.5 kg) |
Dimensions:
19" deep; 20" wide; 42" high (48 cm X 51 cm X107cm) |
Motor:
Heavy-duty 3/4 hp with capacitor and 20ft. (6m) power cord rotates cables
at 715 rpm. Equipped with Ground Fault Circuit Interrupter. |
Chuck Handle:
Supplies the necessary leverage and grip to spin 200ft. (60m) of cable. |
Rear Guide Hose:
Snaps onto bracket at rear of machine to limit cable whipping. |
Folding Handle:
Tall enough for easy transport; folds to take less room in the truck. |
Wheels:
10' semi-pnematic. |
|
