Rodrunner General Pipe Cleaners

Rodrunner

The Rodrunner offers all the features that contractors like in a sectional sewer cleaner – light weight, high speed cable rotation, and

Two Way Operation

Most often, you set the Rodrunner up close to the drain opening. However, on easier jobs where you have some working room, you can run the machine “lawn-mower” fashion, standing behind the machine and keeping

For close-up work, the wheel brake is set, the power switch is placed next to the machine to be used as a foot switch, and the cable guide hose is attached. Now, the Rodrunner is ready to handle the toughest stoppages in 3-10" lines, as far as 200 feet away.

A heavy-duty 3/4 hp motor with capacitor and overload protection spins cable at 485 rpm, an ideal speed for self-feeding into the line while protecting the cable against sudden torque build-ups. For additional protection, the Rodrunner has an adjustable slip clutch, which is factory set at 18-20 ft. lbs.

An optional set of jaws (R-R10AD) enables the Rodrunner to drive 15 ft. x 7/8" (15R10) cables to clear smaller lines.

	Two Way Chuck Handle Locked down against cable, you have both hands free to hold the cable. This isa real helo when pulling cable out of the line.
Folding Handle Rodrunner weighs less than 100 lbs., so it’s way to move to and from the job. Folding handle gives a low profile for more convenient storage on truck.
	Cable Feeding Tool It gets cable around tight bends, when self feeding cable into line. Ten foot cord power swt5ich permits remote control.
Pneumatic Power Switch Power switch is located on handle for storage and use in “walk-in” operation. For close-up work, it’s removed from handle for use as a foot swtich.

Sectional Cables.

Cables are available in three different connector styles. We recommend the “G” connector for reliability and durability. The 1-1/4” cables come in ten and fifteen foot lengths. The ten footers can be ordered with either a spring or chain center. The fifteen foot lengths are available only in hollow version with an “R” connector

Note: All cutters shown with 'G' Connectors.

Rodrunner Cutter Set for 1-1/4" Sectional Cables Catalog # RDCS-G or RDCS-L or RDCS-R
Cutter Name	Part Number with "G" Connector	Part Number with "L" Connector	Part Number with "R" Connector	Application	Photo
Spear Head	G-SHD	L-SHD	R-SHD	Starting Drill (Gets water flowing)
Hook Auger	G-HA	L-HA	R-HA	For removing loose objects and broken cables
2" U-Cutter	G-2UC	L-2UC	R-2UC	For cutting and scraping
3" Heavy Duty Saw Blade	G-3HDB	L-3HDB	R-3HDB	For roots and other stoppages
4" Rotary Saw Blades	G-4RSB	L-4RSB	R-4RSB	For roots and other stoppages
Retrieving Tool	G-RTR-2	L-RTR-2	R-RTR-2	For removing loose objects and broken cables
Coupling Wrench	G-CW	L-CW	R-CK	To disconnect cables and cutters

Rodrunner Units Units - Complete and Ready to Operate Includes rear guide hose.

RD-GF with ten 10GF Flexichain sections with "G" connectors, and RDCS-G cutter set.

RD-GP with ten 10GP Proflex sections with "G" connectors, and RDCS-G cutter set.RD-LF with ten 10LF Flexichain sections with "L" connectors, and RDCS-L cutter set.

RD-LF with ten 10F Flexichain

RD-LP with ten 10LP Proflex sections with "L" connectors, and RDCS-L cutter set.

For 1 hp motor, add prefix "1 HP" as 1HP RD-GF.

220/230 & 240 Volt/50 Hz units are available.

Rodrunner™ Specifications

Weight:
90 lbs. (41 kg)

Dimensions:
22" wide x 19" high with handle folded down.(56 cm x 48 cm)

Motor:
Heavy-duty 3/4 hp with capacitor and 20 ft. power cord rotates cables at 485 rpm. Equipped with ground fault circuit interrupter.

Wheels:
10" rear wheels, 5" caster wheel.

Wheel Brake:
Locks rear wheels in place or releases them in an instant.

Combination Hand or Foot Operated Power Switch:
Air activated for safety; no electrical connection between motor and switch;
can be used as hand or foot switch. Eleven foot air tube.

Twin V-Belts:
For better power transmission.

Safety Clutch:
An adjustable spring-loaded clutch is mounted at the rear of the cable drive shaft.
Accessible without removing machine housing.

Chuck Handle:
Clamps on cable or acts as “dead-man's throttle.”

Cable Counter:
Manually operated, to record number of cables in line.

Rear Cable Guide Hose:
To limit cable whipping behind machine.

Folding Handle:
Reduces truck storage space.

Cutter Set with “G” Connectors:
Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter, 3" Heavy Duty Saw Blade,
4" Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench.

Cutter Set with “L” Connectors:
Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter, 3" Heavy Duty Saw Blade,
4" Rotary Saw Blade, Large Retrieving Tool,Coupling Wrench.